独特的设计允许简单地从检查板上拆下四个螺栓,以检查浮子和气室的清洁或磨损,而不断开管道或电路。
电气外壳提供一般用途、耐候性、防爆或防爆/防蒸汽能力,以及成本效益高的铸316 ss浮子室选项。
使用密封快速动作或水银触点的电路可在各种动作中使用,包括spst、spdt、dpdt和dpst组合。
102的设计特点是三条1英寸的NPT工艺连接,用于侧/侧或侧/底管道,允许底部1“npt连接在使用侧/侧工艺连接时用作排水。
选型表
EXAMPLE | 102 | WT | 7810 | 10 | C1 | 60 | 12 | 102-WT-7810-C1-60 Liquid Level Control with flanged chamber enclosure, SPDT snap action switch, fixed deadband, automatic reset, Operating pressure 400 psig (28 bar) at 425°F (218°C), side/bottom, side/side mounting standard with 1" NPT connections, minimum specfic gravity 0.60. | |
MODEL | 102 | Minimum specific gravity 0.60 | |||||||
1102 | Minimum specific gravity 0.40 | ||||||||
ENCLOSURES | G | General purpose, NEMA 1. | UL | ||||||
WT | Water-tight, NEMA 4, 4X. | UL | |||||||
E | Explosion-proof, Class I Groups B, C, D, Class II Groups E, F, G, NEMA 7, 9. | UL | |||||||
EV | Explosion-proof, vapor proof, Class I Groups B, C, D, Class II Groups E, F, G, NEMA 7, 9. | UL | |||||||
CIRCUITS (for electrical circuits see charts below) | 48XX | Single stage, mercury switch, see chart A or C below. | |||||||
48XX | XX | Two stage, mercury switch, see chart A or C below. | |||||||
78XX | Single stage, snap switch, see chart B or D below. | ||||||||
78XX | XX | Two stage, snap switch, see chart B or D below. | |||||||
78XXHM | Hermetically sealed snap switch, see chart B below. | ||||||||
98XX | Single stage, high capacity DC snap switch, use heat fins (HF) if process temperature excced 350°F (177°C), do not exceed 450°F (232°C), see chart B or D below. | ||||||||
98XX | XX | Two stage, high capacity DC snap switch, use heat fins (HF) if process temperature excced 350°F (177°C), do not exceed 450°F (232°C), see chart B or D below. | |||||||
CHAMBER CONSTRUCTION | C | Cast iron chamber, pressure rating 300 psig (22 bar) at 425°F (218°C). | UL | ||||||
C1 | Cast steel chamber, pressure rating 400 psig (28 bar) at 425°F (218°C). | UL | |||||||
C2 | Cast 304SS chamber. | ||||||||
C216 | Cast 316SS chamber, float and rod, armature 430SS, pressure rating 400 psig (28 bar) at 425°F (218°C). | UL | |||||||
MINIMUM SPECIFIC GRAVITY | 40 | Minimum specific gravity 0.40 (1102 only) | |||||||
60 | Minimum specific gravity 0.60 (102 only) | UL | |||||||
OPTIONS | R | Manual reset for single stage. | |||||||
R1 | Manual reset for lower stage of 2-stage controls. | ||||||||
STW | Stainless steel tag (Wired) | ||||||||
01 | Breather only. (E-Housing only) | ||||||||
02 | Drain only. (E-Housing only) | ||||||||
12 | Breather and drain for E type enclosure. Recommended for high humidity or outdoor service. | ||||||||
23720 | Fungus proofing special 23720. |
表A & B - 电路和额定值- 102系列
SWITCH TYPE | SWITCH ACTION | ELECTRICAL RATINGS IN AMPS | ORDERING CODE | ||||||||
AC | DC | SINGLE STAGE | TWO STAGE | ||||||||
120V | 240V | 440V | 30V | 125V | 250V | LOWER | UPPER | ||||
CHART A Mercury Contacts | SP-ST open on level FALL | 10 | 5 | 3† | 10 | 5 | -4821 | -4821 | -21 | UL | |
SP-ST open on level RISE | 10 | 5 | 3† | 10 | 5 | -4820 | -4820 | -20 | UL | ||
SP-DT one switch | 4 | 2 | 1† | 4 | 2 | -4810 | -4810 | -10 | UL | ||
SP-DT two switches E.I.* | 10 | 5 | 3† | 10 | 5 | -4815 | -4815 | -15 | UL | ||
DP-ST two switches E.I.* open on level FALL | 10 | 5 | 3† | 10 | 5 | -4813 | -4813 | -13 | UL | ||
DP-ST two switches E.I.* open on level RISE | 10 | 5 | 3† | 10 | 5 | -4814 | -4814 | -14 | UL | ||
DP-DT two SP-DT switches | 4 | 2 | 1† | 4 | 2 | -4806 | -4806 | -06 | UL | ||
CHART B snap action contacts | SP-DT one switch | 12 | 5 | 3† | 0.5** | 0.25** | -7810 | -7810 | -10 | UL | |
DP-DT Two SP-DT switches | 12 | 5 | 3† | 0.5** | 0.25** | -7806 | -7806 | -06 | UL | ||
SP-DT one hermetically sealed switch | 5 | 5 | 5** | -7810HM | -7810HM | -10HM | |||||
DP-DT two hermetically sealed SP-DT switches | 5 | 5 | 5** | -7806HM | -7806HM | -06HM | |||||
DP-DT two SP-DT switches | 10 | 3 | 10‡ | 3‡ | -9806 | -06 | |||||
SP-DT one switch | 10 | 3 | 10‡ | 3‡ | -9810 | -10 |
†Available on special order, change 1st digit in ordering code from 4 to 5 or 7 to 8, i.e., -4820 becomes -5820, -7810 becomes -8810, etc.
‡10 amp inductive (polarized) at 125 VDC.
*Electrically Independent.
**Resistive.
表C & D - 电路和额定值 - 1102系列
SWITCH TYPE | SWITCH ACTION | ELECTRICAL RATINGS IN AMPS | ORDERING CODE | |||||||
AC | DC | SINGLE STAGE | TWO STAGE | |||||||
120V | 240V | 440V | 30V | 125V | 250V | LOWER | UPPER | |||
CHART C Mercury Contacts | SP-ST open on level FALL | 10 | 5 | 3† | 10 | 5 | -4821 | -4821 | -21 | |
SP-ST open on level RISE | 10 | 5 | 3† | 10 | 5 | -4820 | -4820 | -20 | ||
SP-DT one switch | 4 | 2 | 1† | 4 | 2 | -4810 | -4810 | -10 | ||
SP-DT two switches E.I.* | 10 | 5 | 3† | 10 | 5 | -4815 | -4815 | -15 | ||
DP-ST two switches E.I.* open on level FALL | 10 | 5 | 3† | 10 | 5 | -4813 | -4813 | -13 | ||
DP-ST two switches E.I.* open on level RISE | 10 | 5 | 3† | 10 | 5 | -4814 | -4814 | -14 | ||
DP-DT two SP-DT switches | 4 | 2 | 1† | 4 | 2 | -4806 | -4806 | -06 | ||
CHART D snap action contacts | SP-DT one switch | 12 | 5 | 3† | 0.5** | 0.25** | -7810 | -7810 | -10 | |
DP-DT Two SP-DT switches | 12 | 5 | 3† | 0.5** | 0.25** | -7806 | -7806 | -06 | ||
SP-DT one hermetically sealed switch | 5 | 5 | 5** | -7810HM | -7810HM | -10HM | ||||
DP-DT two hermetically sealed SP-DT switches | 5 | 5 | 5** | -7806HM | -7806HM | -06HM | ||||
DP-DT two SP-DT switches | 10 | 3 | 10‡ | 3‡ | -9806 | -06 | ||||
SP-DT one switch | 10 | 3 | 10‡ | 3‡ | -9810 | -10 |
†Available on special order, change 1st digit in ordering code from 4 to 5 or 7 to 8, i.e., -4820 becomes -5820, -7810 becomes -8810, etc.
‡10 amp inductive (polarized) at 125 VDC.
*Electrically Independent.
**Resistive.