Dwyer 2900系列本安型电流压力转换器

产品中心 > 压电转换器/位置指示 > Dwyer 2900系列本安型电流压力转换器

Dwyer 2900系列本安型电流压力转换器

2900系列电流到压力传感器提供可靠的高性能,在最危险的环境中最困难的应用。它的NEMA4X外壳是设计和FM和CSA批准的本质安全和防爆操作。该装置具有先进的电路,包括电子反馈控制,具有优越的振动保护和高精度的输出。该2900不位置敏感,易于获取的零点和跨度调整,使现场校准快速和容易。为了便于安装,该模型在前面和后面都有输入和输出端口。它也不是振动敏感,这使2900理想的现场安装在阀门上。这些功能,再加上该单位的紧凑大小,有助于使设置和安装简单。

设计用于危险环境、防振、防爆、耐候和本质安全。

介质:无油,清洁干燥空气过滤到40微米。

输入:4-20 mA.

空气压力:最高输出时最小: 5psig (21 kPa) ; 最大: 100 psig (700 kPa).
输出:3 to 15 psig (0.2 to 1.0 bar), 6 to 30 psig (0.4 to 2.1 bar).
精度:±0.1%of span.

滞性:±0.1%of span.

重复性:±0.1% of span.
死区:0.02% of span.

电源:环路

温度:操作: -40~160°F (-40~71°C); 存储: -40~200°F (-40~93°C).

压力连接:1/4"NPT内螺纹.

电气连接:1/2"NPT内螺纹.

空气消耗:0.05SCFM (0.02 l/s) typical.

输出容量:4.5 SCFM (2.1 l/s) at 25 psig (175 kPa) supply; 12 SCFM (5.7 l/s) at 100 psig (700 kPa) supply.
外壳:铬酸盐处理铝与环氧涂料

封装:耐候型NEMA 4X (IP65), 防爆和本质安全.

重量:1.8 lb (0.82 kg).

认证:CE, CSA, FM.FM Ratings:Explosion-proof for Class I, Division 1, Groups B, C and D. T6, Dust Ignition-proof for Class I, Division 1, Groups E, F and G, T6; Intrinsically safe for Class I, II and III, Division 1, Groups C, D, E, F and G, T4 hazardous (classified) locations and intrinsically safe for Class I, Zone 0, Group IIB, T4 hazardous (classified) locations and suitable for Class I, Groups A, B, C, D, T4 and Class II and III, Division 2, Groups F and G, T6 hazardous (classified) locations.

CSA Ratings:Class I, Division 1, Groups B, C and D; Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; Class II and III, Division 2, Groups F and G.


选型表

ModelDescription
2913-ECurrent to pressure transducer, 4-20 mA input, 3-15 psig (0.2-1.0 bar) output.
2916-ECurrent to pressure transducer, 4-20 mA input, 6-30 psig (0.4-2.1 bar) output.



//网页复制禁止